Pressure-Tapped Hydrostatic Core Holder

Manufacturer: Vinci Technologies
Model Number: PT-HYC

The PT-HYC Series core holders are Hydrostatic type core holders which are equipped with a number of pressure taps molded in the sleeve at discrete locations required by the end user. This design allows to monitor the pressure drop along the length of the core sample during fluid flow tests. The coreholder has a fixed platen at one end over which the rubber sleeve is mounted and located in the other end of the sleeve is a floating platen connected via a ¼” diameter tubing passing through the outside. For variable length cores, this design insures solid contact between the platen and core sample. To change a core sample the confining fluid must be drained off and the knurled screwed ring removed by rotating anti clockwise by hand. This will withdraw the fixed platen together with the sleeve, core and floating platen. After removal of the two platens from the sleeve the core can be withdrawn. Loading a new core sample is carried out in the reverse order. The advantage of this type of coreholder is that the overburden pressure acts on the end of the core as well as the diameter.



Operating pressure rating: 5,000, 10,000 psi, 15,000 psi
Operating temperature: up to 150°C
Fitting: NPT, Autoclave or HIP
Core diameter: Customer specified
Core length: Customer specified
Pressure tap: Customer specified
Wetted parts: Stainless steel, Hastelloy
Sleeve material: Viton
Inlet port: As request
Outlet port: one