Vinci Hydraulic Intensifiers

Manufacturer: Vinci Technologies
Model Number: HI

The HI series are dual cavity cylinders equipped with a low pressure (LP) bore at one end and a high pressure (HP) bore at the other end. The pistons in each cylinder bore are connected by a solid rod. When pressurized fluid enters the larger bore, the fluid in the smaller bore is compressed to a pressure multiplied by the ratio of areas on the two pistons. Consequently, pressures up to 150Kpsi can be achieved by using a commercially available lower pressure (10 Kpsi) pump. Material of construction is either stainless steel or hastelloy.



 Model              

 Ratio   

 HP end vol.
(ml)

HP end pressure
(psi)

HP end ID
(mn)

HP end stroke
(mm)

LP end pressure
(psi)

LP end ID
(mm)

HI 2 2:1 50 20,000 25.46 98.24 10,000 36
HI 4 4:1 25 40,000 18.00 98.24 10,000 36
HI 6 6:1 20 60,000 14.70 117.89 10,000 36
HI 8 8:1 15 80,000 12.73 117.89 10,000 36
HI 10 10:1 10 10,000 11.38 98.24 10,000 36
HI 15 15:1  5 150,000 9.30 73.68 10,000 36

 

Temperature: ambient
Thread connection: ¼” FNPT (Low pressure side ) and  ¼” FHP (High pressure side)
Wetted parts: Stainless steel or hastelloy
Weight: Approx. 22 Kg
Length: 600 mm
Diameter: 90 mm to 120 mm depending on the model.